Solar Powered Generators

Diesel Powered Back Up Generator for the SPG Series Solar Power Generator. This unit ensures that if there is no sun out to produce a current on the Solar Panels, power will always be there. 10KW Max. Please Call Us at 903-498-3363 or 1-800-369-6671 for further information.

Most helpful customer reviews See all customer reviews...

Ensupra grid tie power inverter can obtain the solar energy from solar panel, and can tie to the grid through its output cable with no extra equipment. The installation is Do-It-Your Self (DIY). When the sun shines, the PV panel will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid, saving electricity. INSTALLATION: 1, Connect the Solar Panel or Wind Turbine s DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 12AWG or cables that can handle more than 15A. Optimal length would be less than 8m, longer cables will experience higher voltage drop. The range of output power of Solar Panel or Wind Turbine is 50W~600W. 2, Connect the supplied AC power cord to the inverter and plug it to a home wall socket. 3, The green LED indicators will glow when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The red LED will be on, the inverter will not put out power, this is called Island Protection. Please follow local regulatory electrical codes for installation. If in doubt, consult appropriate licensed contractor. Electrical Specifications: Maximum AC Output Power: 550W AC Output Voltage Range: 120V ±10% AC Output Frequency Range: 60±3Hz Total Harmonic Distortion(THD):

Brand: Ensupra Model: GTI550-36V Dimensions: 9.00" h x 5.00" w x 11.00" l, 6.00 pounds Simply Plug Into Your Wall Electric Outlet (110Volt AC) Save Electricity and Sell Back to Utility Grid Inlet Power Source of 24.8VDC to 46VDC from Solar Panel, Wind Turbine Generator, Hydro, Storage Battery or Any other DC Electric Source. Pure Sine-Wave Output, Island Protection, 90% Peak Efficiency, Plug and play. Stack as many as per need.

Most helpful customer reviews 28 of 30 people found the following review helpful. Ensupra 550W Grid Tie Inverter By Narine Charran This gid-tied inverter works as advertised. I am starting with a small 100w 12v single solar module and this was the most affordable micro-inverter at an affordable price that I could find. Installation was easy, just connect the positive wire from the solar module to the positive pole of the inverter and connect the negative wire from the solar module to the negative pole of the inverter. I used grounding lugs to connect the ends of negative and positive wire to the negative and positive poles of the inverter. I crimped the ends of the wire from the DC volt meter (not voltage tester) to the inverter to measure the voltage from the solar modules.The Ensupra Inverter checks for 12v on the DC side then samples the voltage/frequency on the grid and then synchronizes and connects to the grid. The input voltage ranges from 12v to 29v. Thus anything below 12v will shut down the inverter. Also anything above 29v will also shut down the inverter. There is a built in fan to cool the circuit when it gets hot. When you first turn on the inverter the fan comes on for about 10 seconds. Also during the day the inverter fan will cycle on and off. One thing to note is that when the fan comes on the inverter disconnects from the grid until the fan shuts off.I can add modules until I outgrown the inverter. However, all i have to do is add a second inverter without scrapping this one. For startup this is a great grid-tied inverter. 5 of 5 people found the following review helpful. Works Perfect as Described, but Not UL Listed By Dave Plummer I've been running this for a couple of months now and it works exactly as described. I feed the output from my solar panels back into my house, and while I don't have the capacity to sell back to the grid, it offsets my use. I have the connection going through a KillAWatt meter so I can monitor that it is, in fact, pushing power.For the technically minded, it appears to bias the voltage by about .6V RMS (or 1V peak to peak) over the existing line voltage, which is about what I'd expect.At the 100W range that I'm running it at the fan kicks in periodically and runs for a few seconds. The documentation says it has a thermal cutout at 62C (in case of overload or if the fan died), which I cannot verify but I hope is correct. This unit is not UL listed, which worried me a bit. The reason, I suspect, is that the price to have something certified by UL is the same for a 5000W inverter as it is for a 500W unit, so it's not cost-effective to do so with smaller units. Still, I am somewhat concerned about leaving a device that's not certified connected 'permanently' and when I'm not home.To the one reviewer that complained it was 'inefficient' because he was only seeing 60W from a 100W solar panel, it should be understood that solar panels only make their rated power under ideal conditions (probably at the equator at noon on the solstice) so 60W seems reasonable to me. From my tests, it converts to AC about 90% of what I would otherwise see if my panels were connted solely to batteries.I do not believe this inverter would work with a source that was internally regulated (as some wind turbines are) as it expects the open-circuit voltage to be higher, like a solar panel.For those that are considering a hybrid system, I have the output of my panels connected to this inverter AND to a charge controller. While the batteries are charging the inverter gets virtually nothing, but then as the batteries charge the inverter begins producing and the charge controller takes maybe 0.1A to maintain the batteries. It works well for me, but I'm not an engineer, so always follow instructions and consult a qualified electrician or engineer. 0 of 0 people found the following review helpful. Improved MPPT Grid Tie Inverter By gk Ensupra has improved this Grid Tie Inverter. Ensupra came up with this new

The MotoMaster Eliminator 12Volt Folding Solar Panel, also called the Sunforce Folding Solar Panel is ideal for hiking, camping, sporting events, on campus and at the beach. This solar panel is a flexible, foldable and durable solar product that produces enough power to charge rechargeable flash lights, lanterns, cell phones, GPS units, satellite phones, MP3 players and portable games. Just about anything that is capable of being charged through a standard cigarette lighter adapter (CLA -car charger) can be charged by SUNLINQ. SUNLINQ solar panels made with PowerFLEX technology are lightweight, flexible, weatherproof and durable CIGS (copper indium gallium diselenide) solar cells. It provides higher efficiency than other flexible solar cell technologies, including amorphous silicon, and has been proven to be stable. The 6.5-watt portable solar panel offers a unique solution for reliable and portable solar power for cell phones, PDA's, and other small personal electronics. The SUNLINQ 6.5 watt solar panel weighs less than half of a pound and when folded is compact, lightweight and easily stored and transported. The SUNLINQ product line is designed for low maintenance and rugged durability. The SAE plug provides simple attachment to a load. Built-in grommets allow for hanging, mounting or laying in any position.

Amazon Sales Rank: #8397 in Automotive Color: Black Brand: Sunforce Model: 22005 Made of Durable Nylon with a High Efficiency Thin Film Solar Cell Works with Automobiles, RV’s, Boats & Small Electronics Built-in Blocking Diode Protects Battery Discharge at Night Works in all weather conditions Maintenance Free / Easy Installation

Most helpful customer reviews 35 of 36 people found the following review helpful. Takes a beating By C. Tripp This baby charges up the 8 volt battery in my 1949 international tractorparked out in the orchard quite well. I even ran over it with an empty trailer, and left it out in the rain! I can use large metal spring clamps to hang it anywhere to catch the afternoon sun. Haven't tried it camping yet. 47 of 51 people found the following review helpful. Saved Us in the Forest By Joey Rush I often go Gold & Gemstone hunting and use quite a bit of 12volt equipment, including a forgotten 12v cooler plugged into the dash. Upon leaving the car for a day to prospect a small stream, the cooler drained our battery dead. We returned with only about 2 hours of daylight left, found the battery dead and I immediately removed the charger from my backpack and began charging the battery with direct sunlight. As the sun was setting we "tried it" and there was just enough charge to start us up and we drove the 12 miles out of the forest instead of having to walk it out for help.Not only does the product work, but it has changed the way I think about solar energy. Needless to say, since it saved us that day in the forest, I am rating this product with 5 stars. 25 of 26 people found the following review helpful. Excellent By Thankful I bought one of these about three years ago. I put it on the dashboard of my pickup to keep the battery charged, as the truck did a lot of sitting in the driveway. It worked fine for at least a year. Actually I don't know how long it worked. One day, just on a lark, I put a multimeter on it to see if it was still working, and found that it wasn't putting out 12 volts. After almost two years since I bought it, I sent it back to Sunforce (in Canada) and they sent me a brand new one! I've since had the new one installed in the truck for over a year. Just checked it yesterday and it's still cranking out the volts. I have it wired directly to the battery, as my Toyota pickup cigar lighter outlet isn't active unless the ignition is on.I am buying another one for backpacking to run a AA battery charger and keep GPS battery charged. Because it's so lightweight, it should be very good for this purpose.Nice of them to send me another one after nearly two years!When I got the first one I checked to see if it would run a small AM/FM/SW radio without batteries. It did, with no problems.Good buy. See all 8 customer reviews...

The Sunforce 60012 7 Amp Charge Controller prevents overcharging and discharging of 12 Volt batteries. It is intended for use with 12 Volt solar panels and maintains 12 Volt batteries in a fully charged state. It can handle up to 7 amps of array current and up to 105 watts of solar power. The controller is easy to use with a yellow charging light that indicates that your battery is charging, and a green light that indicates a fully charged battery.

Amazon Sales Rank: #416 in Automotive Brand: Sunforce Model: 60012 Released on: 2005-11-25 Dimensions: 7.00" h x 2.25" w x 4.00" l, Protects battery from overcharge and discharge For use with 12 Volt solar panels and batteries only Handles up to 7 amps of array current and up to 105 watts of solar power Maintains 12V batteries in a fully charged state Operation: Yellow charging light indicates battery charging and green light indicates fully charged battery

The Sunforce 60012 7 Amp Charge Controller prevents overcharging and discharging of 12 Volt batteries. It is intended for use with 12 Volt solar panels and maintains 12 Volt batteries in a fully charged state. It can handle up to 7 amps of array current and up to 105 watts of solar power. The controller is easy to use with a yellow charging light that indicates that your battery is charging, and a green light that indicates a fully charged battery. Key Component of a Solar System Over 15 Watts A charge controller is a very important feature of a solar system and must be used on all systems over 15 Watts. A charge controller protects your batteries from overcharge and discharge. Charge controllers are the maintenance free protection of your solar panel and batteries. A charge controller monitors the battery’s state-of-charge to insure that when the battery needs change-current, it gets it, and also insures the battery isn’t overcharged. Connecting a solar panel to a battery without a regulator seriously risks damaging the battery and potentially causing a safety concern. Charge controllers are rated based on the amount of amperage they can process from a solar array.

Most helpful customer reviews 133 of 134 people found the following review helpful. Sunforce 7 amp Solar Controller By Jordan Xaviers Bad:Really cheap quality. Included instructions don't provide enough information. Website is just as un-informative. Cheap connector wires (low current), and is not equipped with screw-on terminal junctions.Good: Product works as advertised. Amazinlgly "regulates" the voltage to the required amount so as not to overcharge the battery. Beware though, in order to test the actual output voltage, you must apply a load on the battery end of the controller BEFORE. Failing this, the output can register volts as high as 20 volts !!! Apparently applying an actual load causes the controller to output the correct voltage range - lucky me, cause I bought 4 units ! The LEDS alternately flickers (fast for good voltage input and slow for low to no voltage on solar panel). The manual did NOT state the order of LED flashes.(1) Fast LED flashes - good voltage/current(2) Slow LED flashes - low/no voltage/current(3) steady Green - fully charged(4) steady amber - possible no load OR really low voltage/currentI recommend you go out and buy 'em. The are a really good deal and does the job at the best price ! I use them in Jamaica, to provide my appliances with power during power outages (very frequent here). Used with solar panels and DC to AC inverter, of course. Considered using a generator, but too many accidents here with generators, too noisy, too bulky, and during hurricane aftermath, fuel is a problem. Solar is freely available, so it was the BEST option all round.Hope this helps all readers ! 26 of 26 people found the following review helpful. Easy to use Charge Controller By A. Moore Two wires to the battery and two wires to the solar panel. It doesn't get much simplier than that. Worked flawlessly out of the box. Yellow LED indicates charging while green LED indicates the battery is charged. 30 of 31 people found the following review helpful. Charger By Stephen Moczary I have this unit connect to two automotive 12V batteries with three 15W panels connect to it. So far the charger works as advertised by preventing battery drain when the sun goes down and charging while the panels are producing at least 13 volts. It is pretty much an install and forget item. Additionally I have those same two batteries tied into one of my trucks 12V power points so that the batteries charge when the vehicle is running by way of the alternator. Even with this double charging set up, the charge controller appears unphased and shows a charge light in the daytime and has on two occasions indicated a fully charged green light. See all 52 customer reviews...

Made in the USA Compliant The SPG3.24KW-19-120 Solar Power Generator from Magnalight is a towable power generation unit powered and charged by two-sixteen panel solar arrays. This unit offers 120VAC, 3.240 kilowatt max output, quiet standalone operation, and incorporates features designed to provide long life and economical operation. This 3.240 kilowatt solar powered generator recharges an included UG4-3AVR95-33 Unigy II battery rated at 2151Ah and provides 120 VAC for operating tools, lighting and other electrical equipment. Compared to an everyday diesel unit, this new solar panel can save the operator thousands in just a few months. Taking into consideration that an average diesel power generator unit costs approximately 6,000 dollars a month to run and maintain; the SPG3.24KW-19-120 Solar Power Generator could pay for itself in just a few short months by removing the need for refueling. This solar power generator is designed to provide 120 VAC power for a wide variety of applications and is ideal for the Magnalight range of 110-120V lighting products. Especially in situations such as entertainment events, work areas and other applications where the equipment must be placed close to the benefactors, the elimination of noise and fumes typically associated with diesel generators is a great benefit. Finally, solar power generators offer a low maintenance alternative to traditional diesel powered generators that often require a qualified diesel mechanic to maintain and/or repair them. This solar powered generator consists of a trailer, NEAM 4x rated enclosures, battery power supply, 24 VDC to 120 VAC inverter, solar panels, and supporting gear to feed current from the panels to the batteries. -------------------------------------------------------------------------------- Generator: 24 Kyocera 135W high efficiency multi-crystal photovoltaic (PV) modules, designed in an array of eight module rows and grouped into (2) sixteen panel a

Amazon Sales Rank: #914780 in Home

Most helpful customer reviews See all customer reviews...

The SPG366A-600 Watt Solar Power Generator with Light Tower Mast from Magnalight is a towable lighting package powered by two deep cycle AGM batteries and charged by a mil-spec 600 watt solar panel. This unit offers quiet, fully standalone operation and incorporates features designed to improve security and provide economical operation. This 600 watt solar powered generator recharges the two included 366 amp hour capacity batteries at 24 amps per hour. Compared to an everyday diesel unit, the new solar panel can save the operator thousands in just a few months. Taking into consideration that an average diesel power generator unit costs approximately 6,000 dollars a month to run and maintain; the 600 Watt Solar Power Generator could pay for itself in just a few short months. The solar power generator is designed for low voltage applications and is ideal for the Magnalight range of LED lighting products. Suggested are the LED10W-9S and LEDLB-80X2 as powerful alternatives to traditional metal halide tower light configurations. Especially in situations such as entertainment events, work areas and other applications where the lighting must be placed close to the benefactors, the elimination of noise and fumes typically associated with diesel generators is a great beenfit. Finally, solar power generators offer a low maintenance alternative to traditional diesel powered generators that often require a qualified diesel mechanic to maintain and/or repair them. A-J- Pyramid Base, Worm mounts B- Telescopic Pneumatic Tower Complete set up position F- Solar Array G- Suspension, Leveling I- Light Mount Bar Click Photos to Enlarge C- Batteries, Controller, Compressor This solar powered generator consists of two high capacity batteries, solar panels and supporting gear to feed to current from the panels to the batteries. The components are simpler and the operator is dealing only with low voltage. The following illustration wi

Amazon Sales Rank: #281326 in Single Detail Page Misc

Most helpful customer reviews See all customer reviews...

NPower provides a complete 1800 Watt solar solution! Now you can put the power of alternative energy to use with this complete solar energy package that includes a pair of 100 Watt solar panels, twin 12V AGM batteries and a Xantrex PowerHub 1800 charger/inverter that lets you convert and store energy and an NPower 30 Amp digital charge controller. This package lets you capture, store and deliver the power you need for a variety of applications, including your home or cabin. Depending on your level of expertise, professional installation may be required for this item. Running Watts: 1,800, Amps: 220, Power (Volts): 12, Battery Type: 12V, Batteries (qty.): 2, Alternative Power Collection: Yes, Automatic Switch Back: Yes, Hardwired: Yes, Solar Power Compatible: Yes, Dimensions L x W x H (in.): 20 x 14 x 14

Amazon Sales Rank: #163887 in Home Improvement Brand: NPower Versatile NPower 110 Watt solar panels provide 14.5% module conversion efficiency per each 4.9in. x 4.9in. cell. Aluminum frame, tempered glass with EVA laminate and weatherproof film makes panels suitable for continuous outdoor use. Includes cable and MC4 plug system; additional wire may be required to complete installation, depending on your application. Two panels are included in this offer; each panel is 42.5in.L x 31.8in.W x 1.4in.H. 12V, 110Ah UPG AGM (absorbed glass mat) batteries are shock-resistant and maintenance-free, producing higher cranking amps, extremely low (1-3%) self-discharge rate and greater vibration resistance. Non

Most helpful customer reviews 9 of 10 people found the following review helpful. To JD -- yes, this is misleading By Patrick Delcastillo I'm an Electrical Engineer -- and I can't see for the life of me how a 2x100W panel system could be called an "1800 Watt Solar Package." That description is completely misleading.This is a 200 Watt solar system, as the maximum power delivered from the solar panels is 200 Watts. (And average power would be considerably less...)Just because the batteries and inverter can deliver 1800 Watts doesn't make this an 1800 Watt solar system. It's just a 200 Watt system. 13 of 23 people found the following review helpful. Misleading? By Honest John The title says 1800W yet the panels (2) are rated at 100W each. IT seems the inverter is rated at 1800W.I would love if you can clarify this. See all 2 customer reviews...