Solar Powered Generators

Ensupra grid tie power inverter can obtain the solar energy from solar panel, and can tie to the grid through its output cable with no extra equipment. The installation is Do-It-Your Self (DIY). When the sun shines, the PV panel will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid, saving electricity. INSTALLATION: 1, Connect the Solar Panel or Wind Turbine s DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 25A. Optimal length would be less than 8m, longer cables will experience higher voltage drop. The range of output power of Solar Panel or Wind Turbine is 50W~600W. 2, Connect the supplied AC power cord to the inverter and plug it to a home wall socket. 3, The green LED indicators will glow when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The red LED will be on, the inverter will not put out power, this is called Island Protection. Please follow local regulatory electrical codes for installation. If in doubt, consult appropriate licensed contractor. Electrical Specifications: Maximum AC Output Power: 550W AC Output Voltage Range: 120V ±10% AC Output Frequency Range: 60±3Hz Total Harmonic Distortion(THD):

Amazon Sales Rank: #8795 in Lawn & Patio Brand: Ensupra Model: GTI550-18V Dimensions: 9.00" h x 5.00" w x 11.00" l, 6.00 pounds Simply Plug Into Your Wall Electric Outlet (110Volt AC) Save Electricity and Sell Back to Utility Grid Inlet Power Source of 10.8VDC to 28VDC from Solar Panel, Wind Turbine Generator, Hydro, Storage Battery or Any other DC Electric Source. Pure Sine-Wave Output, Island Protection, 90% Peak Efficiency, Plug and play. Stack as many as per need.